PoE Technologies USA Manufacturer of Power-over-Ethernet Products

Power-over-Ethernet (PoE) and a single Cat5/Cat6 cable can provide both power and data, allowing for quick and easy installation."

Single Line Power-over-Ethernet Extender Plus

The SLE-PoE Plus is a Harden Power-over-Ethernet extender delivering the ability to extend 25 watts of 48vdc Power and Ethernet data for PoE devices such as IP Cameras, IP Access Controls, and Wireless Access Points without the need for any additional power.

The SLE-PoE-Plus is a industrial strength network switch that regenerates Ethernet data traffic and power every 328ft (100 meters). Multiple units linked in series provide Ethernet and power for up to 2624 feet (800 meters).

Product Highlights:

• Superior robust design with a IP67/NEMA 4x rating
• Waterproof Ethernet connectors
• Draws less than 1.5 watts of power.
• Extended up to 25 Watts of Power.
• 802.3af and 802.3at compliant.

Specs:

Standards: IEEE 802.3 for 10Base-T Ethernet
IEEE 802.3µ for 100Base-TX Fast Ethernet
IEEE-802.3af for PoE
IEEE 802.3 Auto-Negotiation
Data Transfer Rate: 10/100/200Mbps
Connectors: Waterproof IP67 rated RJ-45
Topology: Linear
Humidity: Operating: 10 % to 90 % RH
Size: : L 6inches W 4.25inches H 1.75inches
Power: IEEE 802.3af and IEEE 802.3at 48 vDC
Temperature: Operating Temp: -40° ~ 140° F
Storage Temp: -40° ~ 158° F

10/100Mbps Auto-Negotiation/Auto-MDIX Fast Ethernet Port
Half or Full Duplex Operation for Each Port
Operates at Maximum Packet Filtering and Forwarding Rate
Store and Forward Switching Method
64KB Buffer memory Address Table up to 1K MAC Address
Zero packet loss back-pressure flow control for half duplex

Model Number
SLE-PoE-Plus

Features:

• IEEE-802.3at compliant
• IP67/Nema4x Aluminum Enclosure
• Draws Less than 1.5 watts of power
• 64 Mac Address Table
• 10/100/200 Mbs Bandwith
• Network Switch Technology
• Waterproof RJ45 Connectors

Downloads:

SLE-PoE-Plus




A&E Spec

Model Numbers:

SLE-PoE-Plus: Single Port PoE Extender 25 watts 802.3at